How to wash tiles after renovation? Best tips
When the room renovation is nearing its end and the dream tiles already adorn the floors and walls, it's time for a major cleanup. And that's when most of us start wondering how to clean the tiles after a renovation. In this article, we will try to answer this question. After reading this, cleaning tiles after renovation won't be difficult for you.
Cleaning Tiles After Renovation – What Supplies Do You Need?
No matter how extensive the renovation you carried out, every cutting and laying of tiles results in dirt and dust particles settling on their surface. While it's worth being cautious during the renovation process, you will most likely still need to clean the tiles after the renovation anyway.
In this article, we will tackle several proven methods for removing dirt and advise you on what to use to wash tiles after renovation. Before you start, however, you must remove all cement grout contamination from the tile surface. At the very beginning, if possible, open all the windows in the room you will be cleaning. Ventilation will make it easier for you to clean wall or floor tiles.
Then, be sure to get the right supplies and protective materials. To avoid contact with dust, put on protective gloves and you can protect your face with a mask and goggles. This way, you eliminate the risk of skin irritation from contact with dust and cleaning agents.
You will need a plastic bucket, a mop, microfiber cloths, clean water, and cleaning liquid. Start by superficially cleaning the tile surface and removing the dust that has accumulated on them. You can do this with a regular broom and dustpan. If you have a good vacuum cleaner, this step will be easier and faster.
Cleaning Tiles After Renovation – Light Dirt
Wondering what to use to clean tiles after renovation? First, determine the type of dirt you are dealing with, as this will dictate the cleaning agents to use. Keep in mind that improper cleaning can damage the delicate structure or scratch the glaze or porcelain tiles. Do not use tools with sharp finishes – wire brushes or brushes with stiff bristles – to refresh them. Cleaning agents with microgranules or additives are also not recommended, as they can damage the polished surface. Surely you don't want unsightly scratches on the glossy surface?
If only minor dirt has appeared on the surface of your tiles, then warm water and dish soap or a special ceramic cleaning liquid will be enough to remove them. This is dedicated to rooms such as the kitchen or bathroom. Thoroughly wipe the tile surface with a wet cloth and liquid, then wait a few minutes for them to dry. If you are cleaning glossy ceramic, such as Tile Constellation Black Gloss, don't forget to polish thoroughly. This way you will remove water and liquid streaks and any fingerprints.
And what about matte tiles, such as the Tile Diamond Marble Matte? When removing minor dirt, start by wiping the tiles with a dry cloth. You can refresh the matte surface with devices that generate steam. A steam mop or a pressure washer is effective, as it successfully removes most dirt (even that invisible to the naked eye). Matte tiles do not require polishing, which makes their maintenance significantly shorter and easier.
How to Remove Glue or Silicone from Tiles After Renovation?
We have to disappoint you, but cleaning glue from tiles after renovation is a very tedious task, especially if the glue has already dried. The ideal solution is caution during application, but from our own experience, we know that reality is quite different. What to do when a small amount of glue dries on the tile surface? First, wet the tiles with water, then apply a post-construction residue remover and leave it for a few minutes. After this time, remove the remaining glue with a paper towel or a clean cloth. We advise against using sharp tools (scrapers, knives) to scratch off the glue. Their improper use can result in scratching the tile.
Are you facing cleaning tiles after renovation where you've noticed silicone residue? Know that there is an effective way to remove it in this case too. Simply spray the silicone stain with alcohol used for disinfecting wounds. The preparation will soften the dirt, which you can then get rid of using a soft sponge, such as a dishwashing sponge.
Or maybe you're wondering how to clean tiles after grouting? We have a method for that too. It is best to remove grout when the material is still fresh – the task is much easier then. Usually, the initial cleaning after laying the tiles is done by the contractors. They remove residual glue, grout, and calcium using specialized slightly acidic agents, which they then rinse off with clean water.
You shouldn't believe the myths that using fabric bleach or hydrochloric acid is safe. These materials very quickly damage the surface of ceramic tiles. To remove dirt after grouting, use ordinary warm water with a natural cleaning liquid. This will certainly be enough, regardless of whether you laid floor tiles or wall mosaics, such as light Arabesque tiles.
How to Clean Floors After Renovation – Several Important Tips
Floor tiles like Tile Hexagon Large Dark Grey Matte are an excellent choice for heavily used rooms, such as the kitchen, bathroom, or hallway. Cleaning them after renovation is not difficult at all. It only requires a bit of your time and effort.
The simplest way is to wash floor tiles with a detergent suitable for glaze. You can opt for a liquid or a cleaning agent in the form of a delicate milk. First, vacuum the tiles thoroughly, then pour hot water into a bucket and add a few drops of the product. Wash the tiles using a flat or round mop. Don't forget that a lot of dirt accumulates in the grout lines, and under the influence of moisture, it turns into mold and harmful fungi. You can refresh the floor grout lines with a mixture of water, vinegar, and baking soda. Gently rub the paste prepared in this way into the grout lines, leave for about half an hour, and then thoroughly wash with warm water.
Wondering what to use to wash floors after renovation to avoid streaks? A steam mop is perfect for this. The device produces steam while working and effortlessly cleans thoroughly, then pour hot water into a bucket and add a few drops of the product. Wash the tiles using a flat or round mop. Don't forget that a lot of dirt accumulates in the grout lines, and under the influence of moisture, it turns into mold and harmful fungi. You can refresh the grout lines on the floor with a mixture of water, vinegar, and baking soda. Gently rub this prepared paste into the grout, leave it for about half an hour, and then rinse thoroughly with warm water.
Wondering what to use to clean floors after renovation without leaving streaks? A steam mop is perfect for this. The device produces steam during operation and effortlessly cleans even the most stubborn dirt. Using this type of equipment, you can forget about tedious floor scrubbing, wringing out the mop, and waiting for the floor to dry.
Cleaning Tiles After Renovation – Now You Know How to Do It!
Now you know what to use to clean tiles after renovation and which products you should use. Or maybe you are looking for the highest quality ceramic tiles because your renovation is still ongoing? Familiarize yourself with the assortment of the Raw Decor online store. In our offer, you will find beautiful and durable wall and floor tiles. Ceramic tiles, mosaics, glass tiles, as well as construction chemicals await you.
SUGGESTED PRODUCTS:
